Hengstler Grado 921 Manual Treadmill
• Z100 / Z300 Z500 Z700 Treadmill OWNER’S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW TREADMILL! • Table of Contents Important Safety Instructions 2 Important Electrical Information 3 Important Operation Instructions. 4 Assembly instructions. 5 Operation of Your New Treadmill. 9 Programmable Features. 12 Fitness Test. 14 Target Heart Rate 16 Using a Heart Rate Transmitter.
17 Heart Rate Control Operation. • ■ Keep hands away from all moving parts. ■ Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working properly, call your dealer. ■ Keep the mains cord away from heated surfaces. Stardust Memories Ita Download Itunes. • Circuit breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur when a treadmill is first turned on or even during normal use.
Grado 901, 911, 921 grado 902, 912, 922 grado 904, 924 grado 905 grado 906, 916 grado 913, 923. Hengstler is never far away - wherever you are in the world. Hengstler grado 921 gu hengstler grado 901 manual hengstler grado 921 manual. Repair your broken hengstler part we can repair your hengstler.
If your treadmill is tripping the circuit breaker (even though it is the proper current rating and the treadmill is the only appliance on the circuit) but the circuit breaker on the treadmill itself does not trip, you will need to replace the breaker with a high inrush type. • These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury. NEVER mount or dismount the treadmill while the belt is moving.
SPIRIT treadmills start with at a ●. Dell Windows 7 Professional 64bit Sp1 Oem Isolation there. • Assembly Pack Check List Step1 #58 - 3/8' #59 - 3/8' Split Washer (6 pcs) Flat Washer (6 pcs) #77 – M5 x 12mm #108 – 3/8” x 3-3/4” Self Tapping Screw (4 pcs) Button Head Socket Bolt (6 pcs) Step2 #111 - M5 x 10mm #112 - M5 x 16mm. • Assembly Instructions Step 1: Upright Tubes • The right side upright tube (19) has the computer cable (A) pre-installed. Lift the tube off the walking surface and attach it to the base frame.
You need to gently pull on the computer cable as you line up the upright tube, taking the slack out, so the cable does not get pinched between the tube and the base frame. • Step 2: Console Assembly • • Connect together the mating computer cables (A & C), hand pulse cables (D & F, right and B & E, Left) and attach the ground cable (H) to the hole (I) in the steel frame with a M5 x 16mm screw (112) and a M5 star washer(128).
